HowTo: Create exFAT partition on GNU/Linux

Step-by-Step descriptions of how to do things.
Post Reply
User avatar
^rooker
Site Admin
Posts: 1469
Joined: Fri Aug 29, 2003 8:39 pm

HowTo: Create exFAT partition on GNU/Linux

Post by ^rooker »

Quick overview:
  1. This guide assumes you already have the required packages installed.
  2. Create a partition of type "7" (in fdisk): HPFS/NTFS/exFAT
  3. Format it using "mkfs.exfat"
1) Create the partition:
Create a partition and set it to type "7" in fdisk.

2) Format the partition:
Let's assume your partition is "/dev/sdc1":

Code: Select all

$ sudo mkfs.exfat -n "LABEL" /dev/sdc1
It'll output something like this:
mkexfatfs 1.2.3
Creating... done.
Flushing... done.
File system created successfully.
That's it! Your new exFAT partition ready to use. :)
Jumping out of an airplane is not a basic instinct. Neither is breathing underwater. But put the two together and you're traveling through space!
Post Reply