temperature dependent 'slack-joint'

Linux howto's, compile information, information on whatever we learned on working with linux, MACOs and - of course - Products of the big evil....
Post Reply
User avatar
^rooker
Site Admin
Posts: 1481
Joined: Fri Aug 29, 2003 8:39 pm

temperature dependent 'slack-joint'

Post by ^rooker »

[PROBLEM]
Some PC hardware won't work for no obvious reason at all, although it works sometimes and stops suddenly.

[HINT]
Try using a hair dryer to heat-up the affected piece of hardware (be careful, since you might overheat some component) and see if it works then.


I've once had a network adapter which disfunctioned if my room-temperature was below 25°C, so I had to warm it up a bit using a hair dryer - I did this WHILE the system was running :-)
Worked quite well, but I decided pretty soon to buy a new one, since my whole motherboard got quite hot during the process.
Post Reply