gdisk: "Error is 123."

Linux howto's, compile information, information on whatever we learned on working with linux, MACOs and - of course - Products of the big evil....

gdisk: "Error is 123."

Postby ^rooker » Thu Mar 19, 2020 3:49 am

I've attached a SATA disk using a SATA-to-USB3 adapter. dmesg output said it shows up as "/dev/sdh", but gparted didn't show it - and gparted threw the following error message:
Problem opening /dev/sdh for reading! Error is 123.

It was a 3.5" regular spinning HDD, and I was using a bus-powered SATA-to-USB adapter. So the disk didn't even manage to spin up. I had to try it... :wink:
So I've used an externally powered docking station, and everything was fine 8)
  • 0

Jumping out of an airplane is not a basic instinct. Neither is breathing underwater. But put the two together and you're traveling through space!
User avatar
Site Admin
Posts: 1450
Joined: Fri Aug 29, 2003 8:39 pm
Reputation: 0

Return to Knowledge Base

Who is online

Users browsing this forum: Google [Bot] and 4 guests

Who is online over last 24 hours

Users browsed this forum in the last 24 hours: Google [Bot] and 12 guests

Reputation System ©'