PVE/Proxmox: Stuck in a boot-reset loop after adding kernel parameter

Linux howto's, compile information, information on whatever we learned on working with linux, MACOs and - of course - Products of the big evil....
Post Reply
User avatar
peter_b
Chatterbox
Posts: 381
Joined: Tue Nov 12, 2013 2:05 am

PVE/Proxmox: Stuck in a boot-reset loop after adding kernel parameter

Post by peter_b »

[PROBLEM]
After adding new kernel parameters for full IOMMU separation of hardware devices (See Proxmox PVE: passthrough of non-GPU + split IOMMUs).

Seems like loading the kernel module (?) for `pcie_acs_override` support, triggers to load the mokmanager.efi boot image:
proxmox_pve-mokmanager_boot_loop.jpg
proxmox_pve-mokmanager_boot_loop.jpg (11.1 KiB) Viewed 3669 times
By default, the "reset system" option seems to be selected, causing the system to get stuck in a boot-loop.

[SOLUTION]
It seems to be sufficient to "confirm" the change of boot-parameters, by selecting "always continue boot".

However, I'm personally a bit unsatisfied with this, as I don't yet fully understand what caused mokmanager to load in the first place, and if there's anything else that I *should* have done, rather than just saying "ignore and continue"? :|

Related proxmox forum entry:
https://forum.proxmox.com/threads/addin ... er.147538/
Post Reply